AEG PNC914913070 사용자 설명서 - 페이지 25
{카테고리_이름} AEG PNC914913070에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG PNC914913070 40 페이지.
페이지 인쇄
About 20 minutes after the
programme start, the
programme duration could
be adjusted again
depending on the capacity
of water absorption of the
fabrics.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).
11.9 Programme phase
indicators
When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
running:
.
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
11.10 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the button Start/Pauze.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Start/Pauze again.
The washing programme continues.
11.11 Cancelling a running
programme
1. Press the button Aan/Uit to cancel
the programme and to deactivate
the appliance.
2. Press the button Aan/Uit again to
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating
the ProSense phase. The
water and the detergent are
not drained out in order to
avoid waste.
11.12 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
1. Touch the button Start/Pauze.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
.
3. Close the door and touch the button
Start/Pauze.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete, or set
Pompen/Centrifugeren programme
and than press Start/Pauze button.
11.13 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start/Pauze button
goes off.
The door unlocks and the indicator
goes off.
ENGLISH
25