Brother MFC-9320CW 연결 매뉴얼 - 페이지 3
{카테고리_이름} Brother MFC-9320CW에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-9320CW 6 페이지. Vista network connection repair instructions
Brother MFC-9320CW에 대해서도 마찬가지입니다: 기술 사양 (6 페이지), 빠른 설정 매뉴얼 (47 페이지), 빠른 설정 매뉴얼 (49 페이지)
![Brother MFC-9320CW 연결 매뉴얼](/uploads/products/server2/2447823/2447823.jpg)
MFC9320CW Vista Network Connection Repair Instructions
6. Follow the instructions on the screen & continue to PART 6. If no printer is found, continue to
PART 10.
NOTE: If two or more Brother machines of the same model name are found, this
utility can only diagnose one of these machines. Please turn off the other machines
temporarily then click "Retry".
PART 6: VERIFY THAT THE PRINTER DRIVER IS INSTALLED
1. On the computer Click START -> (SETTINGS) -> PRINTERS (AND FAXES)
PRINTERS AND OTHER HARDWARE ->VIEW INSTALLED PRINTERS.
2. Verify that the Brother printer is in the list. If the Brother printer is listed, continue to step 3.
If the Brother printer is not listed, the driver may not be installed properly. Continue to PART
10 to reinstall the Brother driver.
3. Verify that the Brother printer is set as default. This is especially important if you use the
print icon to print from within applications. If the Brother printer is set as the default printer,
it will have a check mark in front of the icon. To set your Brother machine as the default
printer, RIGHT CLICK on the Brother printer and select SET AS DEFAULT (PRINTER).
PART 7: VERIFY THAT THE PRINTER STATUS IS READY AND THE PRINT QUEUE IS EMPTY
1. While still in the Printers folder locate the Brother printer in the list and hover your mouse
over the Brother printer icon. Below is an example of what you may see:
Printer Status: Ready (Could also state: OFFLINE, PAUSED-OFFLINE, etc.)
Documents: 0 (Could be any number)
2. If there are any documents waiting in the queue, right-click on the Brother Printer driver and
select CANCEL ALL DOCUMENTS.
Note: You may have to make several attempts to clear the queue. If the queue will
not clear, you may need to restart the computer.
3. If the status states: OFFLINE, right-click on the Brother Printer driver and check USE
PRINTER ONLINE or uncheck USE PRINTER OFFLINE.
NOTE: If this is not an option, continue to the next step.
4. If the status states: PAUSED, right-click on the Brother Printer driver and check RESUME
PRINTING or uncheck PAUSE.
5. If the status states: ERROR, and you have cleared the queue successfully, right click on the
driver and select PAUSE, then right click on the printer and select RESUME to clear the error
status.
6. Once the driver status has been verified, continue to PART 8.
PART 8: ATTEMPT A TEST PRINT
1. Attempt to print a test page to determine if the issue has been resolved.
or
3
© 1995 - 2010 Brother International Corporation
www.brother-usa.com