Brother MFC-9325CW 빠른 설정 매뉴얼 - 페이지 35

{카테고리_이름} Brother MFC-9325CW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-9325CW 48 페이지. Quick setup guide - english

페이지 인쇄

Wireless Network

The wizard will search for wireless networks

available from your machine. Choose the SSID

that you wrote down for your network in

step 18-a on page 28, and then click Next.

Note

• If the list is blank, check that the access point

has power and is broadcasting the SSID, and

then see if the machine and the access point

are within range for wireless communication.

Then, click Refresh.

• If your access point is set to not broadcast the

SSID you can manually add it by clicking the

Advanced button. Follow the on-screen

instructions for entering the Name (SSID), and

then click Next.

If your network is not configured for

Authentication and Encryption, the following

screen will appear. To continue configuration,

click OK and go to k.

Enter the Network Key you wrote down in

step 18-a on page 28 and then enter the key

again in Confirm Network Key, then click Next.

Click Next. The settings will be sent to your

machine.

Note

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• If the wireless setup failure screen appears,

click Retry.

Disconnect the USB cable between the

computer and the machine.

Click Next to continue to install MFL-Pro Suite.

Wireless setup is now complete. A four

level indicator at the right of your

machine's LCD will show the wireless

signal strength of your access

point/router.

To install MFL-Pro Suite, continue to

step 21-d on page 42.

Now go to

page 42

Macintosh