Brother MFC-9420CN 빠른 설정 매뉴얼 - 페이지 8

{카테고리_이름} Brother MFC-9420CN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-9420CN 40 페이지. Quick setup guide - english
Brother MFC-9420CN에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (40 페이지), 서비스 매뉴얼 (13 페이지)

페이지 인쇄
Brother MFC-9420CN 빠른 설정 매뉴얼
Step 1
Install the OPC Belt
3
Cartridge
Do NOT touch the green surface of
the OPC belt.
Do NOT expose the OPC belt
cartridge to bright room light or
sunlight for more than two minutes
to avoid damaging the belt. Leave
the cartridge in its packaging until
immediately before installing.
1
Lift the Scanner Unit.
2
Lift the Inside cover so that it latches under
the scanner unit.
Inside cover
6
Setting Up the machine
Scanner unit
3
Remove the orange belt tension release
pins from both sides of the OPC belt
cartridge. Remove the protective sheet.
OPC belt
cartridge
4
Put the OPC belt cartridge into the machine
guides with the flat side facing you.
5
Lock the belt cartridge lock levers.
Belt cartridge lock levers
6
Close the Inside cover and then close the
Scanner Unit.
Protective sheet
Belt tension
release pin