Brother MFC-J2310 여기에서 시작하기 매뉴얼 - 페이지 32

{카테고리_이름} Brother MFC-J2310에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J2310 47 페이지. Wi-fi direct guide
Brother MFC-J2310에 대해서도 마찬가지입니다: 매뉴얼 (22 페이지), 제품 안전 매뉴얼 (25 페이지)

페이지 인쇄

For Wireless Network Users

Choose Yes, I have a USB cable to use for

installation. and then click Next.

Temporarily connect the USB cable directly to

the computer and the machine.

If the confirmation screen appears, check the

box and click Next, go to g.

Otherwise, go to h.

NOTE

• For instructions on connecting the USB cable

to the USB port of your machine, see Connect

the USB cable on page 15.

• If this screen appears, read the Important

Notice. Check the box after you confirm the

SSID and Network Key, and then click Next.

When the following screen appears, check Yes

if you want to connect to the listed SSID. Click

Next and go to j.

When the following screen appears, the wizard

will search for wireless networks available to

your machine. Choose the SSID that you wrote

down for your network in step 19-a on

page 29, and then click Next.

NOTE

• If a list of SSIDs is not displayed, make sure

your access point is on and set to broadcast the

SSID. Make sure the machine and the access

point are within communication range, then

click Refresh.

• If your access point is set to not broadcast the

SSID you can manually add it by clicking the

Advanced button. Follow the on-screen

instructions for entering the Name (SSID), and

then click Next.