Brother MFC-J2510 매뉴얼 - 페이지 8
{카테고리_이름} Brother MFC-J2510에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J2510 22 페이지. Wi-fi direct guide - english
Brother MFC-J2510에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 매뉴얼 (13 페이지), 매뉴얼 (18 페이지), 빠른 설정 매뉴얼 (47 페이지), 제품 안전 매뉴얼 (25 페이지)
페이지 인쇄
Configuration methods
Configuring your network using Wi-Fi Direct
(For MFC-J2510/J4510DW/J4710DW)
The Wi-Fi Direct network settings are configured from the control panel of your Brother machine.
One-push configuration using Wi-Fi Direct
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network.
NOTE
When the machine receives the Wi-Fi Direct request from your mobile device, the message
Wi-Fi Direct connection request received. will be displayed. Press OK to connect.
a
Press
.
b
Press All Settings.
c
Press Network.
d
Press Wi-Fi Direct.
e
Press Push Button.
f
When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
g
Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed.
Press OK on your Brother machine. This will start the Wi-Fi Direct setup.
To cancel, press
h
Do one of the following:
When your Brother machine is the G/O, connect your mobile device to the machine directly.
When your Brother machine is not the G/O, it will display available device names with which to
configure a Wi-Fi Direct network. Choose the mobile device to which you want to connect and press
OK. Search for available devices again by pressing Rescan.
i
If your mobile device connects successfully, the machine displays the message Connected.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 14.
.
2
2
2
5