Brother MFC-J415W 고급 사용자 설명서 - 페이지 14

{카테고리_이름} Brother MFC-J415W에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J415W 50 페이지. Quick setup guide - spanish
Brother MFC-J415W에 대해서도 마찬가지입니다: 설치 매뉴얼 (35 페이지), 기술 사양 (2 페이지), 빠른 설정 매뉴얼 (33 페이지), (영어) 빠른 구성 가이드 (35 페이지)

페이지 인쇄
Brother MFC-J415W 고급 사용자 설명서
Chapter 3
Additional sending
operations

Sending a fax manually

Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
Note
(MFC-J410 and MFC-J415W only)
To send a multiple page fax, use the ADF.
a
Press
(FAX).
b
Load your document.
c
To listen for a dial tone pick up the
handset of the external telephone.
d
Dial the fax number.
e
When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass
press 1 on the machine to send a fax.
f
Replace the handset.
8
Dual Access
(Monochrome only)
3
You can dial a number and start scanning the
fax into memory—even when the machine is
3
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Broadcasting
(Monochrome only)
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers, and up to 50 manually dialled
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a
Press
b
Load your document.
c
Press a or b to choose Broadcasting.
Press OK.
(FAX).
3
3