AEG 200372733 지침서 - 페이지 18

{카테고리_이름} AEG 200372733에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 200372733 32 페이지. Aeg refrigerator freezer combination instruction manual

Starting Up - Setting the Temperature

1. Plug the mains plug into the mains socket.

2. Press (A) button. The alarm light (M) flashes since the temperature is reached.

The buzzer sounds.

3. Pressing button (L) the buzzer stops.

4. Press either the (I) or (K) button. The temperature display switches over and

the DESIRED temperature currently set flashes on the temperature display.

5. Set the required temperature by pressing the (I) or (K) buttons (see section

"Temperature setting buttons"). The temperature display will immediately

show the changed setting. Each time the button is pressed the temperature is

adjusted by 1 °C.

From a food safety point of view -18 °C should be considered sufficiently cold

for storing food in the freezer.

The FROSTMATIC function accelerates the freezing of fresh food and, at the

same time, protects foodstuffs already stored from undesirable warming.

1. The FROSTMATIC function is switched on by pressing the FROSTMATIC button

(H).

The yellow light (G) illuminates.

If the FROSTMATIC function is not ended manually, the appliance will switch

off the FROSTMATIC function after about 52 hours. The yellow light goes out.

2. The FROSTMATIC function can be ended manually at any time by pressing the

FROSTMATIC button again. The yellow light goes out.

In the event of an abnormal temperature rise inside the freezer (e.g. power

cut) warning light (M) will start to flash and a buzzer will sound. Push the

alarm reset button (L) to stop the buzzer sound, while the warning light will

continue to flash.

The buzzer will stop automatically when the temperature has returned to

normal while the warning light (M) will continue to flash. If we press the

alarm reset button (L) we stop the warning light and at the same time the

indicator show for about 5 seconds the warmest temperature reached in the

compartment.