AEG 75438 KG 사용자 설명서 - 페이지 15

{카테고리_이름} AEG 75438 KG에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 75438 KG 32 페이지. Electrolux freezer user manual
AEG 75438 KG에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄

Temperature warning

For the freezer section:

An alarm sounds and the TEMPERATURE indicator and red back light flash,

as soon as the temperature in the freezer section rises above -11 °C. In addi-

tion the temperature display for the freezer section flashes.

If the temperature in the freezer section falls back below -11 °C, the alarm

automatically switches itself off. The TEMPERATURE indicator and the red

back lighting continue to flash.

1. You can turn off the alarm and the red back lighting using the RESET but-

ton.

For 5 seconds the temperature display for the freezer section shows the

warmest temperature that was reached in the freezer section during the

temperature warning. After that the temperature display stops flashing and

switches back to the current temperature in the freezer section. The TEM-

PERATURE indicator continues to flash, as long as there is a temperature

warning.

If there is an interruption to the power supply during an alarm, when the

appliance is reconnected to the supply, it starts with an acoustic and visual

alarm.

If the possibility of partial or complete thawing exists, you should check the

quality of the foods.

A rise in temperature may be caused by:

– frequent door opening for long periods of time;

– loading with large quantities of warm foods;

– high ambient temperature;

– an error with the appliance.

Function Errors

If the appliance's electronics recognise a technical problem that has to be

remedied by the Customer Service Department, an alarm sounds and the

SERVICE indicator appears back lit with a flashing red light.

The temperature display indicates:

– a square or a letter in the temperature display of the fridge for a fault in

the fridge,

– a square or a letter in the temperature display of the freezer for a fault in

the freezer.

1. Using the RESET button you can switch off the alarm and the flashing red

light. The SERVICE indicator continues to be lit as long as there is an elec-

trical malfunction.