Brother NC-7100W 빠른 설정 매뉴얼 - 페이지 7
{카테고리_이름} Brother NC-7100W에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother NC-7100W 13 페이지. Wireless print server for 802.11b and 802.11g
페이지 인쇄
We recommend that you contact
your network administrator if you are
unsure about the correct IP address
settings.
7
A list of the found Wireless Networks
will be displayed. Select the Access
Point/Base Station or Ad-hoc network
you wish to associate the NC-7100w
with and click Next.
If the Access Point/Base Station or
Ad-hoc network does not appear on
the list, you can manually add it by
clicking Add. Follow the on screen
instructions for entering the SSID
and Channel number.
8
If your network is not configured for
Authentication and Encryption, the
screen shown will appear. To continue
installation, click OK.
Go to Step 10.
6
9
When configuring your Brother
Wireless device, you must ensure that it
is configured to match the
Authentication and Encryption settings
of our existing wireless network. If your
network is configured for Authentication
and Encryption, choose the
Authentication Method and
Encryption Mode from the pull downs
in each setting box. Then enter the
Network Key and click Next.
Authentication Methods:
Authentication is used to identify each
wireless device that is attempting to
access the network.
Open System
Wireless devices are allowed access to
the network without authentication.
Shared Key (Infrastructure mode only)
A secret pre-determined key is shared
by all devices that will access the
wireless network.
Encryption Methods:
Encryption is used to secure the data
itself. The NC-7100w supports WEP
encryption.
None
No encryption method is used.
WEP
By using WEP (Wired Equivalent
Privacy), the data is transmitted and
received with a secured key.