Brother NC-8100h 빠른 네트워크 설정 매뉴얼 - 페이지 6
{카테고리_이름} Brother NC-8100h에 대한 빠른 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother NC-8100h 6 페이지. Print/fax server
페이지 인쇄
How to refer to the User's Guide
The NC-8100h User's Guide can be viewed from the CD-ROM supplied with your MFC in PDF.
1.
Insert the CD-ROM into your CD-ROM Drive.
2.
The installation screen will automatically load.
3.
If possible, select the model name that you use.
4.
Select On-Line Documentation.
5.
Select the optional NC-8100h User Guide.
Troubleshooting
1.
Make sure that your MFC is powered on and is On Line and in Ready mode.
2.
Press the Test button. Then the current settings of the NC-8100h are printed.
3.
Verify that the cabling and Network connections are good. If possible, try connecting the machine to a differ-
ent port on your hub using a different cable.
4.
Check to see if there is any LED activity. The NC-8100h has a two color LED for diagnosing problems.
LED
• Orange LED: This LED will flash Orange when connected to a 100Base-TX Network and is receiving data.
• Green LED: This LED will flash Green when connected to a 10Base-TX Network and is receiving data.
• No light: This LED will be off when there is no connection to the network and no data is being received.
Note
If there is a valid connection to the network, the LED will blink orange or green.
TEST SWITCH
• Short push : Prints a network configuration page.
• Long push (more than 5 seconds) : Resets the network configuration back to factory default settings.
Ethernet
RJ-45
LED
Test Switch
6