Brother TD-series 사용자 설명서 - 페이지 21

{카테고리_이름} Brother TD-series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother TD-series 36 페이지. Network users manual - spanish
Brother TD-series에 대해서도 마찬가지입니다: 네트워크 사용 설명서 (39 페이지), (스페인어) 매뉴얼 델 유저리오 (39 페이지)

페이지 인쇄

For Windows

XP and Windows Server

Click the Start button and choose Printers and Faxes.

For Windows

XP:

Click Add a printer to start the Add Printer Wizard.

For Windows Server

Double-click Add Printer to start the Add Printer Wizard.

Click Next when you see the Welcome to the Add Printer Wizard screen.

Choose Local printer and deselect the Automatically detect and install my Plug and Play printer

option, then click Next.

You must now choose the correct Network printing port. Choose Create a new port and choose

Standard TCP/IP Port from the pull-down window, then click Next.

The Add Standard TCP/IP Printer Port Wizard will now appear. Click Next.

Enter the IP address, or the print server name you wish to configure. The Wizard will automatically enter

the Port name information for you, then click Next.

Windows

XP and Windows Server

specify the correct IP address or name then an error dialog will appear.

Click Finish to complete the Wizard.

Now that you have configured the port, you must specify which printer driver you wish to use. Choose

the appropriate driver from the list of supported printers. If you are using a driver supplied with the printer

on CD-ROM then choose the Have Disk option to browse to the CD-ROM.

For example, choose the "X:\your language\Drivers\TD-XXXX\x86\Driver\i386" or

"X:\your language\Drivers\TD-XXXX\x64\Driver\x64" folder (where X is your drive letter. XXX is your

model name). Click Open, and then OK. Choose your printer model, then click Next.

Specify a name and click Next.

Continue through the Wizard clicking Finish when complete.

2003

2003:

2003 will now contact the printer that you specified. If you did not

Network printing: basic TCP/IP Peer-to-Peer printing