Brother 2 매뉴얼 - 페이지 32
{카테고리_이름} Brother 2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother 2 39 페이지. Hewlett-packard laser printer user guide
Brother 2에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)
페이지 인쇄
When Material Has Become Jammed in the
Machine
a
Press
in the operation panel to turn off the machine.
b
Unplug the power cord from the electrical outlet.
c
Remove the base attachment from the shaft.
a Base attachment
d
Pull the feeder release lever (on the right side of the
machine) toward you.
a Feeder release lever
Only the right side of the shaft is raised, and the shaft is
unlocked. This allows jammed material to easily be removed.
e
Remove any jammed material.
• Slowly pull out the material. Otherwise, internal machine parts
may be damaged.
• Remove the leader sheet on the back before pulling out the
material.
1
1
Note
• If material gets under the carriage and cannot be removed,
make sure that the machine is turned off, remove the
holder from the carriage, and then slowly move the
carriage by hand to remove the material.
f
Return the feeder release lever (on the right side of the
machine) to its original position.
a Feeder release lever
Only the right side of the shaft is lowered, and the shaft is
locked.
g
Install the base attachment onto the shaft.
h
Insert the plug of the power cord into an electrical outlet.
i
Press
in the operation panel.
When the opening screen appears, touch anywhere on the
display.
1
31