Brother CP-2000 사용자 설명서 - 페이지 25
{카테고리_이름} Brother CP-2000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother CP-2000 33 페이지. Copyboard
Brother CP-2000에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 브로셔 및 사양 (4 페이지), 부품 참조 목록 (18 페이지)
Adjusting the scanner
1
With your hand, lightly scroll the writing surface down approx. 11.8 in. (30
cm), and then clean the writing surface well.
2
Hold down both d and f until the PAPER indicator begins flashing. The
writing surface will scroll to its correct starting position.
3
Wait until the PAPER indicator goes off. If a page is printed with the "ERR =
XX" message, repeat this procedure from step
4
If the problem persists, clean the scanner as explained in Cleaning the
scanner on page 24.
Cleaning the black bar
1
Turn off the printer, unplug the AC adaptor, and then position the
copyboard so that it is standing up mounted on the stand or the wall.
2
Open the paper compartment by pulling up its latch.
3
Using a lint-free cloth that is either dry or lightly moistened with isopropyl
alcohol, gently wipe the black bar while turning the gear at the right.
4. Maintenance
1
.
23