Brother DCP-130C 빠른 설정 매뉴얼 - 페이지 7
{카테고리_이름} Brother DCP-130C에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-130C 22 페이지. Windows vista
Brother DCP-130C에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 빠른 설정 매뉴얼 (22 페이지), 설정 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (24 페이지), 사용자 설명서 (47 페이지), 빠른 설정 매뉴얼 (15 페이지)
Note
When you use Legal size paper, press and hold
the universal guide release button as you slide out
the front of the paper tray.
5
Gently adjust the paper side guides with both
hands and the paper length guide to the paper.
Make sure the paper side guides and paper
length guide touch the sides of the paper.
Note
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause
paper feed problems.
6
Close the output paper tray cover.
Setting Up the Machine
7
Push the paper tray firmly back into the
machine.
8
While holding the paper tray in place, pull out
the paper support (
unfold the paper support flap ( ).
Note
Do not use the paper support flap for Legal paper.
3
Connecting the power cord
1
Connect the power cord.
Improper Setup
DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.
Note
The control panel warning LED will stay on until
you have installed the ink cartridges.
) until it clicks, and then
5