Brother DCP-8110DN 매뉴얼 - 페이지 11

{카테고리_이름} Brother DCP-8110DN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-8110DN 36 페이지. Printer
Brother DCP-8110DN에 대해서도 마찬가지입니다: 고급 사용자 설명서 (50 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 빠른 설정 매뉴얼 (23 페이지), 사용자 설명서 (23 페이지), 제품 안전 매뉴얼 (23 페이지), 고급 사용자 설명서 (39 페이지), 제품 안전 매뉴얼 (22 페이지)

Digital Certificate for SSL communication

Creating a Certificate Signing Request (CSR)

A Certificate Signing Request (CSR) is a request sent to a CA in order to authenticate the credentials

contained within the certificate.

Note

We recommend that the Root Certificate from the CA be installed on your computer before creating the

CSR.

Click Create CSR.

Enter a Common Name and your information, such as Organization.

Your company details are required so that a CA can confirm your identity and attest to the outside world.

Note

• The length of the Common Name must be less than 64 characters. Enter an identifier such as an IP

address, node name or domain name to use when accessing this machine through SSL/TLS

communication. The node name is displayed by default. The Common Name is required.

• A warning will pop-up if you enter a different name in the URL than the Common Name that was used for

the certificate.

• The length of the Organization, the Organization Unit, the City/Locality and the State/Province must

be less than 64 characters.

• The Country/Region should be an ISO 3166 country code composed of two characters.

• If you are configuring the X.509v3 certificate extension, choose the Configure extended partition check

box and then choose Auto (Register IPv4) or Manual.

You can choose the Public Key Algorithm and Digest Algorithm settings from the pull-down list. The

default settings are RSA(2048bit) for Public Key Algorithm and SHA256 for Digest Algorithm.