AEG OKO SANTO 4085-6KG 사용 설명서 - 페이지 21

{카테고리_이름} AEG OKO SANTO 4085-6KG에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO SANTO 4085-6KG 44 페이지. Electronic refrigerator/freezer

Applies only to the temperature display for the refri-

gerator

• When the FAST CHILL function is switched on (see also section: "Fast

Chill/Fast Freeze"), "IC" is displayed in the temperature display. As

long as the FAST CHILL function is switched on, no refrigerator tem-

perature is indicated in the temperature display.

Applies only to the temperature display for the free-

zer compartment

• If, for example, frozen goods have been partially or completely tha-

wed due to a power failure, the temperature display alternately indi-

cates:

– the freezer compartment temperature (ACTUAL temperature) and

– the highest temperature to which the frozen goods have warmed.

Prior to Initial Start-Up

Before connecting the appliance to the mains and putting it into ope-

ration for the first time, leave the appliance to stand for 30 minutes if

was transported upright. After transport on its side, the appliance must

be left to stand for 4 hours before putting it into operation. This is

necessary to allow the oil to flow back into the compressor. Otherwise

the compressor may be damaged.

0 Please clean the appliance interior and all accessories prior to initial

start-up (see section: "Maintenance and Cleaning").

0 Remove the cold accumulation block from the freezer tray.

0 Place the cold accumulation block into a compartment or drawer only

after the optimal storage temperature of -18°C has been reached, and

allow to freeze.

0 After 24 hours place the cold accumulation block at the front of the

freezer tray.

0 Re-freeze the thawed cold accumulation block in the same fashion, e.g.

after cleaning the appliance.

818 16 35-00/7