AEG OKO SANTO SANTO 사용 설명서 - 페이지 12

{카테고리_이름} AEG OKO SANTO SANTO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO SANTO SANTO 28 페이지. Built-in refrigerators

Prior to Initial Start–Up

1. Please clean the appliance interior and all accessories prior to initial

start-up (see section: "Cleaning and Maintenance").

The temperature regulator is in the

refrigerator compartment on the

upper right. It is also the ON/OFF-

switch.

Position "0" = Refrigeration off

Position "1" = Warmest interior temperature

Position "6" = Coldest interior temperature

1. Plug the mains plug into the mains socket.

2. Set the required temperature by turning the temperature regulator.

The compressor starts and then runs automatically. The interior lighting

comes on.

3. If you want a higher or lower temperature, turn the temperature regu-

lator to a warmer or cooler setting respectively.

Note: When the setting is changed, the compressor does not start

immediately if automatic defrosting is currently taking place.

Goods to be refrigerated can be loaded immediately after switching on,

because the storage temperature in the refrigerator is quickly reached.

Important! Wait until the freezer compartment has reached a tempera-

ture of –18 °C, before storing frozen food.

Note: From a food science point of view, +5 °C for the refrigerator

compartment and -18 °C for the freezer compartment should be con-

sidered cold enough as a storage temperature.

The following effects are of significance in respect of the interior tem-

perature:

– Ambient temperature;

– Quantity and temperature of the food stored;

– Frequency with which the door is opened and how long it is left

open

– A defect in the appliance.