Brother MFC MFC-290C 빠른 설정 매뉴얼 - 페이지 6

{카테고리_이름} Brother MFC MFC-290C에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC MFC-290C 20 페이지. Quick setup guide - spanish
Brother MFC MFC-290C에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (22 페이지), 빠른 설정 매뉴얼 (19 페이지), (영어) 빠른 구성 가이드 (23 페이지)

페이지 인쇄

Gently push the ink cartridge until it clicks. After

all the ink cartridges are installed close the ink

cartridge cover.

Note

The machine will prepare the ink tube system for

printing. This process will take approximately four

minutes. Do not turn off the machine.

Check the print quality

When the preparation process has finished, the

LCD shows this message

Set Paper and

Press Start

Press Colour Start.

Check the quality of the four colour blocks

on the sheet. (black/yellow/cyan/magenta)

If all lines are clear and visible, press 1 (Yes)

on the dial pad to finish the quality check.

If you can see missing short lines, press 2 (No)

on the dial pad and go to d.

The LCD asks you if the print quality is OK for

black and colour. Press 1 (Yes) or 2 (No) on

the dial pad.

Black OK?

1.Yes 2.No

Color OK?

1.Yes 2.No

After pressing 1 (Yes) or 2 (No) for both black

and colour, the LCD shows:

Start Cleaning?

1.Yes 2.No

1 1

Press 1 (Yes), the machine will then start

cleaning the colours.

After cleaning is finished, press Colour Start.

The machine starts printing the Print Quality

Check Sheet again. Go back to b.

Poor