Brother MFC MFC-290C 빠른 설정 매뉴얼 - 페이지 8
{카테고리_이름} Brother MFC MFC-290C에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC MFC-290C 19 페이지. Quick setup guide - spanish
Brother MFC MFC-290C에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (22 페이지), (영어) 빠른 구성 가이드 (23 페이지)
페이지 인쇄
7
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD from your
position, try changing the contrast setting.
a
Press Menu.
b
Press 1.
c
Press 6.
d
Press a or b to choose Dark or Light.
Contrast:Dark
Contrast:Light
e
Press OK.
f
Press Stop/Exit.
8
8
Set the date and time
The machine displays the date and time, and if you
set up the station ID, the date and time displayed on
your machine will be printed on every fax you send.
a
Press Menu.
b
Press 0.
c
Press 2.
d
Enter the last two digits of the year on the dial
pad, and then press OK.
Year:2008
(e.g. Enter 0 8 for 2008.)
e
Repeat for Month and Day, and Hours and
Minutes in 24-hour format.
f
Press Stop/Exit.
9
Enter personal
information (station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a
Press Menu.
b
Press 0.
c
Press 3.
d
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a "+" for
international codes, press l. For example, to
enter the China dialling code "+86 ", press l, 8,
6 and then the rest of your number.
e
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the last character, press c to
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, press Clear/Back.