Brother MFC-250C 빠른 설정 매뉴얼 - 페이지 5
{카테고리_이름} Brother MFC-250C에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-250C 22 페이지. Quick setup guide - spanish
Brother MFC-250C에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (20 페이지), 빠른 설정 매뉴얼 (19 페이지), (영어) 빠른 구성 가이드 (23 페이지)
![Brother MFC-250C 빠른 설정 매뉴얼](/uploads/products/server2/2455340/2455340.png)
h
Note
The machine will prepare the ink tube system for
printing. This process will take approximately four
minutes. Do not turn off the machine.
5
Check the print quality
a
Set Paper and
q
Press Start
Press Colour Start.
b
Check the quality of the four colour blocks
on the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes)
on the dial pad to finish the quality check.
If you can see missing short lines, press 2 (No)
on the dial pad and go to d.
d
The LCD asks you if the print quality is OK for
black and colour. Press 1 (Yes) or 2 (No) on
the dial pad.
Black OK?
1.Yes 2.No
.
Color OK?
1.Yes 2.No
a
After pressing 1 (Yes) or 2 (No) for both black
and colour, the LCD shows:
Start Cleaning?
1 1
1.Yes 2.No
e
Press 1 (Yes), the machine will then start
cleaning the colours.
f
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to b.
OK
Poor
q
q
q
5