AEG OKO_SANTO SUPER 사용 설명서 - 페이지 19

{카테고리_이름} AEG OKO_SANTO SUPER에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG OKO_SANTO SUPER 21 페이지. Automatic refrigerator
AEG OKO_SANTO SUPER에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지), 사용 설명서 (32 페이지), 사용 설명서 (22 페이지)

페이지 인쇄

Heavy build up of frost, pos-

sibly also on the door seal.

Unusual noises.

The compressor does not

start immediately after chan-

ging the temperature set-

ting.

Water on the floor or on sto-

rage shelves.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light

bulb, switch off the appliance and unplug it, or pull the fuse or the cir-

cuit breaker. Light bulb data: 220-240 V, max. 15 W

To switch off the appliance, turn

the temperature regulator to posi-

tion "0".

Unplug the mains plug.

To change the light bulb, undo the

screw.

Press the light bulb cover as

shown and slide it backwards.

Change the defective light bulb.

Refit the light bulb cover and the

screw.

Put the refrigerator back into ope-

ration.

Door seal is not air tight

(possibly after changing

over the hinges).

Appliance is not level.

The appliance is touching

the wall or other objects.

A component, e.g. a pipe,

on the rear of the appliance

is touching another part of

the appliance or the wall.

This is normal, no error has

occurred.

Water drain hole is blocked.

D411

Carefully warm the leaking

sections of the door seal

with a hair dryer (not hotter

than approx. 50 ¡C). At the

same time shape the war-

med door seal by hand such

that it sits correctly.

Readjust the feet.

Move the appliance slightly.

If necessary, carefully bend

the component out of the

way.

The compressor starts after

a period of time.

See the "Cleaning and

Care" section.