Brother MFC-8460N 설정 매뉴얼 - 페이지 19

{카테고리_이름} Brother MFC-8460N에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8460N 23 페이지. Scan to ftp (file transfer protocol)
Brother MFC-8460N에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지), 빠른 설정 매뉴얼 (41 페이지), 매뉴얼 (7 페이지), 빠른 설정 매뉴얼 (37 페이지)

Brother MFC-8460N 설정 매뉴얼
1

BRAdmin Light utility

1
The BRAdmin Light is a utility for initial setup of Brother network connected devices. It can also search for Brother
products on your network, view the status and configure basic network settings, such as IP address.
For more information on BRAdmin Light, visit us at http://solutions.brother.com.
Note
If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version
that is available as a download from http://solutions.brother.com.
Installing the BRAdmin Light
configuration utility
Note
The default password for the print server is
'access'. You can use BRAdmin Light to change
this password.
1
Click Install Other Drivers or Utilities on the
menu screen.
2
Click BRAdmin Light and follow the on-screen
instructions.
3
When the User Account Control screen
appears, click Allow.

For Network Users

Setting your IP address, Subnet
Mask and Gateway using BRAdmin
Light
Note
If you have a DHCP/BOOTP/RARP server in your
network, you don't have to do the following
operation. Because the print server will
automatically obtain its IP address.
1
Start BRAdmin Light. It will search for new
devices automatically.
2
Double-click the unconfigured device.
3
Choose STATIC for the Boot Method. Enter
the IP Address, Subnet Mask and Gateway,
and then click OK.
4
The address information will be saved to the
machine.
17