Brother MFC-8510DN 빠른 설정 매뉴얼 - 페이지 5

{카테고리_이름} Brother MFC-8510DN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8510DN 25 페이지. Printer
Brother MFC-8510DN에 대해서도 마찬가지입니다: 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 사용자 설명서 (23 페이지), 제품 안전 매뉴얼 (23 페이지), 제품 안전 매뉴얼 (22 페이지)

페이지 인쇄

Connect the power cord

and telephone line

Important

DO NOT connect the interface cable

yet.

Connect the AC power cord to the machine and

then plug it into an electrical socket.

Turn the machine's power switch on.

Connect the telephone line cord. Connect one

end of the telephone line cord to the socket on

the machine marked LINE and the other end to

a telephone wall socket.

Important

The telephone line cord MUST be connected to

the socket on the machine marked LINE.

(Example for U.K.)

WARNING

The machine must be grounded using an

earthed plug.

Since the machine is grounded through the

electrical socket, you can protect yourself

from potentially hazardous electrical

conditions on the telephone network by

keeping the power cord connected to your

machine when you connect it to a telephone

line. Similarly, you can protect yourself when

you want to move your machine by

disconnecting the telephone line first and then

the power cord.

Note

If you are sharing one telephone line with an

external telephone, connect it as shown below.

a Extension telephone

b External telephone

Note

If you are sharing one telephone line with an

external telephone answering machine, connect it

as shown below.

a Extension telephone answering machine

(not supported)

b External telephone answering machine

Set the receive mode to External TAD if

you have an external answering machine.

See Choose a Receive Mode on page 6. For

additional details, see Connecting an

external TAD in the Basic User's Guide.

(Example for U.K.)