Fujitsu fi-6670 Series 시작하기 매뉴얼 - 페이지 12

{카테고리_이름} Fujitsu fi-6670 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-6670 Series 26 페이지. Image scanner
Fujitsu fi-6670 Series에 대해서도 마찬가지입니다: 사용자 설명서 (26 페이지), 설치 절차 매뉴얼 (6 페이지), 브로셔 (2 페이지), 사양 (2 페이지), 시작하기 매뉴얼 (14 페이지), 소모품 교체 및 청소 지침 (22 페이지)

페이지 인쇄
Fujitsu fi-6670 Series 시작하기 매뉴얼

■ Flatbed type

Name
Check LED
Function Number Display
[Function] button
[Send to] button
[Scan/Stop] button
[Power] button
/Power LED

■ Indications on the Function Number Display

Indication
8
Blinks only one time upon turning on the scanner.
P
Indicates that the scanner has been turned ON and is being initialized.
1
Indicates that the scanner is ready for scanning.
This means initialization has ended successfully after power-on. This status is called "Ready
Status."
J
Indicates that a recoverable error occurred during scanning with the scanner.
"J" or "U" and an "error number" are displayed alternately.
U
For details of the errors, refer to "Temporary Errors" in the Operator's Guide.
After the error has been resolved, you can return to the Ready Status (see "1" above) by
pressing the [Scan/Stop] or [Send to] button.
E
Indicates that an abnormality (device error) occurred in the scanner during its initialization or
F
during scanning documents.
C
"E", "F", "C", "H", "A", or "L" and an "error number" are displayed alternately. When the error
H
number is displayed, turn the Main Power Switch OFF and then ON again. If the error
persists after this, contact the dealer where you purchased the scanner or an authorized
A
FUJITSU scanner service provider.
L
Check
Check LED
Function Number Display
Function
[Function] button
Send to
[Send to] button
Scan / Stop
[Scan/Stop] button
Power
[Power] button/Power LED
Lights (in orange) when an error occurs.
Indicates the scanner status.
Switches the function activated by the [Send to] button.
Launches linked application software for scanning.
Resets an error indication.
Launches linked application software for scanning.
Resets an error indication.
Cancels ongoing scanning.
Turns the scanner ON and OFF.
Lights (in green) when the scanner is turned ON.
Function
12
Description