Brother MFC-8810DW 매뉴얼 - 페이지 28

{카테고리_이름} Brother MFC-8810DW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8810DW 30 페이지. Google cloud print guide - english
Brother MFC-8810DW에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 빠른 설정 매뉴얼 (45 페이지), 매뉴얼 (12 페이지), 빠른 설정 매뉴얼 (45 페이지), 제품 안전 매뉴얼 (23 페이지)

페이지 인쇄

Glossary

Wi-Fi Direct network terms

Group Owner (G/O)

If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi

Direct network. The G/O assigns a SSID name, password and IP address for the Wi-Fi Direct network. The

default setting is Off.

Device Information

Device Name

You can check the device name of the machine in the Wi-Fi Direct network environment. The device name

will be shown as HL-xxxx** or MFC-xxxx** (where xxxx is your model name and ** is the character string

assigned by your Brother machine).

SSID

This field displays the current Wi-Fi Direct network SSID name. The display shows up to 32 characters of the

SSID name.

IP Address

This field displays the current IP address of the machine assigned by the G/O.

Status Information

Status

This field displays the current Wi-Fi Direct network status. When your machine is a G/O, the machine shows

G/O Active(**) (where ** shows the number of devices). When your machine is a client, the machine

shows Client Active. If you see Off, your machine's Wi-Fi Direct interface is disabled.

Signal

This field displays the current Wi-Fi Direct network signal strength.

Channel (For HL-5470DW(T) and HL-6180DW(T))

This field displays the current Wi-Fi Direct network channel.

Speed (For HL-5470DW(T) and HL-6180DW(T))

This field displays the current Wi-Fi Direct network speed.