Brother MFC-8810DW 빠른 설정 매뉴얼 - 페이지 21

{카테고리_이름} Brother MFC-8810DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8810DW 45 페이지. Google cloud print guide - english
Brother MFC-8810DW에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 매뉴얼 (36 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 빠른 설정 매뉴얼 (45 페이지), 매뉴얼 (12 페이지), 제품 안전 매뉴얼 (23 페이지)

페이지 인쇄

Wired Network

Choose Wired Network Connection

(Ethernet) and then click Next.

Note

If you want to install the PS driver (BR-Script3

printer driver), choose Custom Install and then

follow the on-screen instructions.

When the Firewall/AntiVirus detected screen

appears, choose Change the Firewall port

settings to enable network connection and

continue with the installation.

(Recommended) and click Next.

If you are not using the Windows

the user's guide for your software for

information on how to add the following

network ports.



For network scanning, add UDP port 54925.



For network PC-Fax receiving, add UDP port

54926.



If you still have trouble with your network

connection, add UDP port 161 and 137.

The installation will automatically continue. The

installation screens appear one after another. If

prompted, follow any on-screen instructions.

Important

DO NOT cancel any of the screens during the

installation. It may take a few seconds for all

screens to appear.

• If prompted, choose your machine from the list,

and then click Next.

• If your machine is not found over the network,

confirm your settings by following the on-screen

instructions.

• If there is more than one of the same model

connected on your network, the IP Address and

Node Name will be displayed to help you

identify the machine.

• You can find your machine's IP address and the

node name by printing out the Network

Configuration Report. See Print the Network

Configuration Report on page 41.

• For Windows Vista

when the Windows Security screen appears,

click the check box and click Install to complete

the installation correctly.

Firewall, see

• If an error message appears during the

software installation, run the Installation

Diagnostics located in

Start/All Programs/Brother/MFC-XXXX LAN

(where MFC-XXXX is your model name).

• Depending on your security settings, a

Windows

window may appear when using the machine or

its software. Please allow or permit the window

to continue.

Windows

Note

and Windows

When the On-Line Registration screen

appears, make your selection and follow the

on-screen instructions. Once you have

completed the registration process, click Next.

When the Setup Complete screen appears,

check the box of the action you want to

perform, and then click Next.

Finish and restart

Click Finish to restart your computer. After

restarting the computer, you must log on with

Administrator rights.

Note

Security or antivirus software

7 users,