Fujitsu fi-7460 서비스 매뉴얼 - 페이지 5

{카테고리_이름} Fujitsu fi-7460에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-7460 18 페이지. Consumable replacement and cleaning instructions

fi-7480 / fi-7460

Replacing the Pick Roller

The Glass inside the ADF becomes very hot when the scanner is being used. Before

you replace the consumables, turn off the power, unplug the power cable, and let cool

for 15 minutes

1. Remove the documents from the ADF paper Chute

2. Remove the ADF Paper Chute

3. Open the ADF - Open the ADF by pressing the ADF Open Lever and Pull the ADF towards

the front of the scanner in the direction of the arrow shown in the pictures below.

When the ADF is open, it might close accidentally. Use caution when the ADF is open.

4. Remove the Pick Shaft Assembly

a. Open the sheet guide by lifting the tabs

b. Rotate the bushing on the Pick Shaft Assembly in the direction of the arrow

ONSUMABLE

EPLACEMENT AND

LEANING

NSTRUCTIONS