Brother MFC-8910DW 빠른 설정 매뉴얼 - 페이지 6
{카테고리_이름} Brother MFC-8910DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8910DW 45 페이지. Quick setup guide - english
Brother MFC-8910DW에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 매뉴얼 (36 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 빠른 설정 매뉴얼 (45 페이지), 사용자 설명서 (23 페이지), 제품 안전 매뉴얼 (23 페이지)
페이지 인쇄
4
Connect the power cord
and telephone line
Important
DO NOT connect the interface cable
yet.
a
Connect the AC power cord to the machine and
then plug it into an AC power outlet.
b
Turn the machine's power switch on.
c
Connect the telephone line cord. Connect one
end of the telephone line cord to the jack on the
machine marked LINE and the other end to a
modular wall jack.
Important
The telephone line cord MUST be connected to
the jack on the machine marked LINE.
6
WARNING
The machine must be grounded using a
3-prong plug.
Since the machine is grounded through the
power outlet, you can protect yourself from
potentially hazardous electrical conditions on
the telephone network by keeping the power
cord connected to your machine when you
connect it to a telephone line. Similarly, you
can protect yourself when you want to move
your machine by disconnecting the telephone
line first and then the power cord.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
Before you connect the external telephone,
remove the protective cap c from the EXT. jack
on the machine.
2
3
a Extension telephone
b External telephone
c Protective cap