Brother MFC-8950DW 빠른 설정 매뉴얼 - 페이지 41

{카테고리_이름} Brother MFC-8950DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8950DW 44 페이지. Laser printers
Brother MFC-8950DW에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 매뉴얼 (21 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (43 페이지), 제품 안전 매뉴얼 (23 페이지)

Brother MFC-8950DW 빠른 설정 매뉴얼

For Network Users

Web Based Management

(web browser)

The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
We recommend Windows
®
Explorer
7.0/8.0 or Firefox
and Safari 4.0/5.0 for Macintosh. Please also
make sure that JavaScript and cookies are
always enabled in whichever browser you use. To
use a web browser, you will need to know the IP
address of the print server. The IP address of the
print server is listed on the Network Configuration
Report.
a
Open your browser.
b
Type "http://machine's IP address/" into your
browser's address bar (where "machine's IP
address" is the IP address of the Brother
machine or the print server name).
For example: http://192.168.1.2/
Note
If you have configured an optional login
password, you must enter it when prompted to
access the Web Based Management.
For more information, see Web Based
Management in the Network User's Guide.
®
Internet
®
®
3.6 for Windows
Print the Network Configuration
Report
You can print the Network Configuration Report to
confirm the current network settings.
a
Turn on the machine and wait until the machine
is in the Ready state.
b
Press Menu.
c
Press a or b to display Print Reports.
Press Print Reports.
d
Press a or b to display Network Config.
Press Network Config.
e
Press Start.
The machine will print the current network
settings.
Restore the network settings to
the factory default
To restore all network settings of the internal
Print/Scan server to the factory default, please follow
the steps below.
a
Make sure the machine is not operating, then
disconnect all the cables from the machine
(except the power cord).
b
Press Menu.
c
Press a or b to display Network.
Press Network.
d
Press a or b to display Network Reset.
Press Network Reset.
e
Press Yes.
f
Press Yes for 2 seconds.
The machine will restart, re-connect the cables
once this is complete.
41