Brother MFC-8950DWT 빠른 설정 매뉴얼 - 페이지 25

{카테고리_이름} Brother MFC-8950DWT에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-8950DWT 44 페이지. Laser printers
Brother MFC-8950DWT에 대해서도 마찬가지입니다: 매뉴얼 (30 페이지), 매뉴얼 (36 페이지), 네트워크 매뉴얼 (29 페이지), 매뉴얼 (27 페이지), 매뉴얼 (21 페이지), 사용자 설명서 (23 페이지), 빠른 설정 매뉴얼 (43 페이지), 제품 안전 매뉴얼 (23 페이지)

페이지 인쇄

For Wireless Network Users

For Wireless Network Interface Users

Before you begin

First you must configure the wireless network settings of your machine to communicate with your wireless access

point/router. After the machine is configured to communicate with your wireless access point/router, computers

and mobile devices on your network will have access to the machine. To use the machine from a computer, you

will need to install the drivers and software. The following steps will guide you through the configuration and

installation process.

Important

• If you are going to connect the machine to your network, we recommend that you contact your system

administrator prior to installation. You must know your wireless network settings before you proceed with this

installation.

• If you have previously configured the wireless settings of the machine, you must reset the network (LAN)

settings before you can configure the wireless settings again.

1. On your machine, press Menu.

2. Press a or b to display Network, and press Network.

3. Press a or b to display Network Reset, and press Network Reset.

4. Press Yes.

5. Press Yes for 2 seconds.

Note

• To achieve optimum results with normal everyday document printing, place the Brother machine as close to

the wireless access point/router as possible with minimal obstructions. Large objects and walls between the

two devices as well as interference from other electronic devices can affect the data transfer speed of your

documents.

Due to these factors, wireless may not be the best method of connection for all types of documents and

applications. If you are printing large files, such as multi-page documents with mixed text and large graphics,

you may want to consider choosing wired Ethernet for a faster data transfer or USB for the fastest throughput

speed.

• Although the Brother MFC-8950DW(T) can be used in both a wired and wireless network, only one of the

connection methods can be used at a time.

• If you use your machine in an IEEE 802.1x supported wireless network, see Using IEEE 802.1x

authentication in the Network User's Guide.

Infrastructure Mode

a Wireless access point/router

b Wireless Network machine (your machine)

c Wireless capable computer connected to

the wireless access point/router

d Wired computer connected to the wireless

access point/router

e Mobile device connected to the wireless

access point/router