Brother MFC-J430w 고급 사용자 설명서 - 페이지 38

{카테고리_이름} Brother MFC-J430w에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J430w 47 페이지. Product safety guide - spanish
Brother MFC-J430w에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지), 매뉴얼 (21 페이지), 제품 안전 매뉴얼 (17 페이지), 빠른 설정 매뉴얼 (37 페이지), 안전 매뉴얼 (17 페이지), 빠른 설정 매뉴얼 (37 페이지), 사용자 설명서 (41 페이지), 빠른 시작 매뉴얼 (37 페이지), 빠른 시작 매뉴얼 (22 페이지), 사용자 설명서 (40 페이지), (스페인어) 매뉴얼 (21 페이지), (스페인어) 매뉴얼 (16 페이지)

Packing and shipping

the machine

When you transport the machine, use the

packing materials that came with your

machine. If you do not pack the machine

properly, any damage that may occur in

transit may not be covered by your warranty.

IMPORTANT

It is important to allow the machine to

"park" the print head after a print job.

Listen carefully to the machine before

unplugging it to make sure that all

mechanical noise has stopped. Not

allowing the machine to finish this parking

process may lead to print problems and

possible damage to the print head.

Open the ink cartridge cover.

Press the ink release levers to release

the ink cartridges and then take out the

ink cartridges. (uuBasic User's Guide:

Replacing the ink cartridges)

Install the orange protective part and

then close the ink cartridge cover.

IMPORTANT

• Make sure the plastic tab on the right side

of the orange protective part (1) clicks

securely into place (2).

• If you are not able to find the orange

protective part, ship the machine without

it. DO NOT install the ink cartridges as an

alternative before shipping.

Lift the machine from the front and hook

the tab of the orange protective part into

the keyed opening (1) on the bottom of

the paper tray. Then latch the protective

part over the raised portion of the paper

tray (2).