Brother MFC-J430w 빠른 설정 매뉴얼 - 페이지 23

{카테고리_이름} Brother MFC-J430w에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J430w 37 페이지. Product safety guide - spanish
Brother MFC-J430w에 대해서도 마찬가지입니다: 고급 사용자 설명서 (47 페이지), 매뉴얼 (12 페이지), 매뉴얼 (21 페이지), 제품 안전 매뉴얼 (17 페이지), 빠른 설정 매뉴얼 (37 페이지), 안전 매뉴얼 (17 페이지), 사용자 설명서 (41 페이지), 빠른 시작 매뉴얼 (37 페이지), 빠른 시작 매뉴얼 (22 페이지), 사용자 설명서 (40 페이지), (스페인어) 매뉴얼 (21 페이지), (스페인어) 매뉴얼 (16 페이지)

For Wireless Network Users

Choose Temporarily use a USB cable

(Recommended) and then click Next.

Note

If this screen appears, read the Important

Notice. Check the box after you confirm the SSID

and Network Key, and then click Next.

Temporarily connect the USB cable (not

included) directly to the computer and the

machine.

If the confirmation screen appears, check the

box and click Next, go to h.

Otherwise, go to i.

Note

For instructions on connecting the USB cable to

the USB port of your machine, see Connect the

USB cable on page 15.

When the following screen appears, check Yes

if you want to connect to the listed SSID. Click

Next and go to k.

When the following screen appears, the wizard

will search for wireless networks available to

your machine. Choose the SSID that you wrote

down for your network in step 19-a on

page 20, and then click Next.

Note

• If the list is blank, check that the access point

has power and is broadcasting the SSID, and

then see if the machine and the access point

are within range for wireless communication.

Then click Refresh.

• If your access point is set to not broadcast the

SSID you can manually add it by clicking the

Advanced button. Follow the on-screen

instructions for entering the Name (SSID), and

then click Next.