Brother MFC-J430w 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Brother MFC-J430w에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J430w 22 페이지. Product safety guide - spanish
Brother MFC-J430w에 대해서도 마찬가지입니다: 고급 사용자 설명서 (47 페이지), 매뉴얼 (12 페이지), 매뉴얼 (21 페이지), 제품 안전 매뉴얼 (17 페이지), 빠른 설정 매뉴얼 (37 페이지), 안전 매뉴얼 (17 페이지), 빠른 설정 매뉴얼 (37 페이지), 사용자 설명서 (41 페이지), 빠른 시작 매뉴얼 (37 페이지), 사용자 설명서 (40 페이지), (스페인어) 매뉴얼 (21 페이지), (스페인어) 매뉴얼 (16 페이지)

Load plain A4 paper

Pull the paper tray completely out of the

machine.

Open the output paper tray cover.

With both hands, gently press and slide the

paper side guides a and then the paper length

guide b to fit the paper size.

Make sure that the triangular marks c on the

paper side guides a and paper length guide b

line up with the mark for the paper size you are

using.

Fan the stack of paper well to avoid paper jams

and misfeeds.

Note

Always make sure that the paper is not curled or

wrinkled.

Check that the paper is flat in the tray.

IMPORTANT

Be careful that you do not push the paper in

too far; it may lift at the back of the tray and

cause paper feed problems.

Gently adjust the paper side guides to the

paper with both hands.

Close the output paper tray cover.

Slowly push the paper tray completely into the

machine.

While holding the paper tray in place, pull out

the paper support until it clicks, and then unfold

the paper support flap.