Brother MFC-J4310DW 매뉴얼 - 페이지 7

{카테고리_이름} Brother MFC-J4310DW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J4310DW 13 페이지. Air print guide - spanish
Brother MFC-J4310DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (47 페이지), 매뉴얼 (36 페이지), 매뉴얼 (22 페이지), 제품 안전 매뉴얼 (17 페이지), 매뉴얼 (13 페이지), 제품 안전 매뉴얼 (20 페이지), (스페인어) 웹 연결 매뉴얼 가이드 (38 페이지), (스페인어) 매뉴얼 (24 페이지), (영어) 제품 안전 가이드 매뉴얼 (16 페이지), (스페인어) 매뉴얼 (12 페이지), (스페인어) 매뉴얼 (11 페이지)

Introduction

How to create a Google account

In order to use Google Cloud Print, you must have a Google account and sign in to your account. If you do

not have an account, use a computer or mobile device to access the Google website and create an account.

If you already have a Google account, there is no need to create an additional account.

Continue with the next procedure, How to register your machine with Google Cloud Print.

You must register your machine with Google Cloud Print using Web Based Management (web browser). A

standard web browser can be used to manage your machine using Hypertext Transfer Protocol (HTTP).

NOTE

• The screens in this section are examples from an inkjet machine.

• For information about the number of printers you can register, visit the Google website

(http://www.google.com/support/cloudprint/).

Before you begin to register your machine, confirm that the correct time and date are set on the control

panel of the machine. See the Quick Setup Guide included with your machine for instructions on setting

the correct time and date.

Confirm that the machine is connected to the same network as the computer or mobile device.

Open the web browser on your computer or mobile device.

Type "vmachine's IP address/" into your browser's address bar (where "machine's IP address" is

your machine's IP address).



For example:

x192.168.1.2/

NOTE

• You can see your machine's IP address in the Network menu on the control panel of your machine. For

more information, see your machine's Network User's Guide.

• If you have set the login password for Web Based Management, type your password in the Login box,

then click