Brother MFC-J4610DW 매뉴얼 - 페이지 10

{카테고리_이름} Brother MFC-J4610DW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J4610DW 22 페이지. Quick setup guide - spanish
Brother MFC-J4610DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (47 페이지), 매뉴얼 (36 페이지), 제품 안전 매뉴얼 (17 페이지), 매뉴얼 (13 페이지), 매뉴얼 (13 페이지), 빠른 설정 매뉴얼 (45 페이지), 제품 안전 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (29 페이지), 제품 안전 매뉴얼 (25 페이지), 여기에서 시작하기 매뉴얼 (47 페이지), (스페인어) 웹 연결 매뉴얼 가이드 (38 페이지), (스페인어) 매뉴얼 (24 페이지), (영어) 제품 안전 가이드 매뉴얼 (16 페이지), (스페인어) 매뉴얼 (12 페이지), (스페인어) 매뉴얼 (11 페이지), (영어) 빠른 구성 가이드 (47 페이지)

Configuration methods

Press Wi-Fi Direct.

Press PIN Code.

When Wi-Fi Direct On? is displayed, press On to accept.

To cancel, press Off.

Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when

Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed. Press OK on

your Brother machine. This will start the Wi-Fi Direct setup.

To cancel, press

Do one of the following:



When your Brother machine is the G/O, it will wait for a connection request from your mobile device.

When PIN Code appears, type the PIN displayed on your mobile device in to the machine. Press

OK. Follow the instructions and go to step j.

If the PIN is displayed on your Brother machine, type the PIN to your mobile device.



When your Brother machine is not the G/O, it will display available device names with which to

configure a Wi-Fi Direct network. Choose the mobile device to which you want to connect and press

OK. Search for available devices again by pressing Rescan. Go to step i.

Do one of the following:



Press Display PIN Code to display the PIN on your machine and type the PIN in to your mobile

device. Follow the instructions and then go to step j.



Press Input PIN Code to type a PIN shown by your mobile device in to the machine and then press

OK. Follow the instructions and then go to step j.

If your mobile device does not display a PIN, press

and try again.

If your mobile device connects successfully, the machine displays the message Connected.

You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your

mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from

the Brother Solutions Center (http://solutions.brother.com/).

If the connection fails, see Troubleshooting on page 14.

Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)

If your mobile device supports the PIN Method of WPS (Wi-Fi Protected Setup), follow these steps to

configure a Wi-Fi Direct network.

NOTE

When the machine receives the Wi-Fi Direct request from your mobile device, the message

Wi-Fi Direct connection request received. will be displayed. Press OK to connect.

Press

Press All Settings.

on your Brother machine. Go back to step a