Brother MFC-J4610DW 매뉴얼 - 페이지 18

{카테고리_이름} Brother MFC-J4610DW에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J4610DW 22 페이지. Quick setup guide - spanish
Brother MFC-J4610DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (47 페이지), 매뉴얼 (36 페이지), 제품 안전 매뉴얼 (17 페이지), 매뉴얼 (13 페이지), 매뉴얼 (13 페이지), 빠른 설정 매뉴얼 (45 페이지), 제품 안전 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (29 페이지), 제품 안전 매뉴얼 (25 페이지), 여기에서 시작하기 매뉴얼 (47 페이지), (스페인어) 웹 연결 매뉴얼 가이드 (38 페이지), (스페인어) 매뉴얼 (24 페이지), (영어) 제품 안전 가이드 매뉴얼 (16 페이지), (스페인어) 매뉴얼 (12 페이지), (스페인어) 매뉴얼 (11 페이지), (영어) 빠른 구성 가이드 (47 페이지)

페이지 인쇄
Brother MFC-J4610DW 매뉴얼
Troubleshooting
Error messages when configuring Wi-Fi Direct from the control panel menu (continued)
Error Message
(For MFC-J2510/J4510DW/
J4710DW)
Connection Error
(For DCP-J4110DW,
MFC-J2310/J4310DW/
J4410DW/J4610DW)
Connection Error
(For MFC-J2510/J4510DW/
J4710DW)
No Device
(For DCP-J4110DW,
MFC-J2310/J4310DW/
J4410DW/J4610DW)
No Device
(For MFC-J2510/J4510DW/
J4710DW)
A device is
already connected.
Press [OK].
(For DCP-J4110DW,
MFC-J2310/J4310DW/
J4410DW/J4610DW)
A device is
already connected.
Press [OK].
Cause
Other devices are trying to connect to the
Wi-Fi Direct network at the same time.
The Brother machine cannot find your
mobile device.
Another mobile device is already connected
to the Wi-Fi Direct network where the
Brother machine is the G/O.
Action
Make sure there are no other devices trying
to connect to the Wi-Fi Direct network and
then try to configure the Wi-Fi Direct
settings again.
Make sure your machine and mobile
device are in the Wi-Fi Direct mode.
Move the mobile device closer to your
Brother machine.
Move your Brother machine and the
mobile device to an obstruction-free
area.
If you are manually configuring the Wi-Fi
Direct network, make sure you have
entered the correct password.
If your mobile device has a configuration
page for how to obtain an IP address,
make sure the IP address of your mobile
device has been configured via DHCP.
After the current connection between your
Brother machine and another mobile device
has shut down, try configure the Wi-Fi
Direct settings again. Confirm the
connection status by printing the Network
Configuration Report (see Network User's
Guide: Printing the Network Configuration
Report).
3
15