AEG RCB732E4MG 사용자 설명서 - 페이지 12

{카테고리_이름} AEG RCB732E4MG에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG RCB732E4MG 31 페이지.
AEG RCB732E4MG에 대해서도 마찬가지입니다: 사용자 설명서 (48 페이지)

• Before using your fridge freezer, wipe all parts with a solution of warm water and a

teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts

to the fridge freezer after cleaning.

• Install the two plastic distance guides (the parts on the black vanes

-condenser- at the rear) by turning it 90° (as shown in the figure) to

prevent the condenser from touching the wall.

• The distance between the appliance and back wall must be a maximum

of 75 mm.

Before Using your Fridge

• When using your fridge for the first time, or after transportation, keep it

in an upright position for at least 3 hours before plugging into the mains.

This allows efficient operation and prevents damage to the compressor.

• Your fridge may have a smell when it is operated for the first time. This

is normal and the smell will fade away when your fridge starts to cool.

Internal lighting

WARNING!

Risk of electric shock.

• Concerning the lamp(s) inside this product and spare part lamps sold separately: These

lamps are intended to withstand extreme physical conditions in household appliances,

such as temperature, vibration, humidity, or are intended to signal information about the

operational status of the appliance. They are not intended to be used in other applications

and are not suitable for household room illumination.

EN -12-