Brother MFC-J825DW 빠른 설정 매뉴얼 - 페이지 41

{카테고리_이름} Brother MFC-J825DW에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-J825DW 42 페이지. Quick setup guide - spanish
Brother MFC-J825DW에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지), 매뉴얼 (21 페이지), 제품 안전 매뉴얼 (17 페이지), 웹 연결 매뉴얼 (22 페이지), 빠른 설정 매뉴얼 (45 페이지), 안전 매뉴얼 (17 페이지), 문제 해결 매뉴얼 (6 페이지), (스페인어) 매뉴얼 (21 페이지), (스페인어) 매뉴얼 (16 페이지), (영어) 빠른 구성 가이드 (44 페이지)

페이지 인쇄
Brother MFC-J825DW 빠른 설정 매뉴얼

For Network Users

Reset the network settings to factory default

To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a
Make sure the machine is not operating, then disconnect all the cables from the machine (except the power
cord).
b
Press Menu.
c
Press Network.
d
Press a or b to display Network Reset and press Network Reset.
e
Press Yes.
f
Hold down Yes for 2 seconds to confirm.
g
The machine will restart, re-connect cables once this is complete.

Entering Text for Wireless Settings

Up to four letters are assigned to each letter button on the Touchscreen. By pressing the correct button repeatedly,
you can access the character you want.
Press
to cycle between letters, numbers and special characters. (The characters available may differ
depending on your country.)
Inserting spaces
To enter a space, press
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character, press
. Re-enter the correct character. You can also back up and insert a character.
Repeating characters
If you need to enter a character that is on the same button as the character before, press c to move the cursor to
the right before you press the button again.
then press the space button
or
.
41