Fujitsu FTP-638WSL110 Series 사용자 설명서 - 페이지 28

{카테고리_이름} Fujitsu FTP-638WSL110 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FTP-638WSL110 Series 47 페이지.

2 Operating Procedures

2.4 Printer Error

The error occurs when the printer cannot print/work normally. The

type of error is shown by the LED when the error is occurring.

Please reset the status when the error occurs.

The following example explains reasons and solutions for problems.

Error

Paper End

Paper Cover

Open

Thermal Head

Temperature

Error

Important

It is normal that the temperature goes up because this printer prints by

heating the thermal head.

The Thermal Head Temperature Error is generated easily by the high

ambient temperature.

Cause

- There is no paper

in the paper cover.

- It is not correctly set

though there is paper

- Particles have

collected on the paper

sensor.

- The paper cover is

open.

- The thermal head is too

hot.

Solution

- Please correctly set

the paper,

refer to chapter 1.5.

- Please clean the paper

sensor,

refer to chapter 4.3.

- Please correctly

close the paper

cover,

refer to chapter 1.5

- Please do not print for a

while.

Once the thermal head

cools down, the error

disappears.