Fujitsu FTP-639MCL354 제품 사양 - 페이지 7

{카테고리_이름} Fujitsu FTP-639MCL354에 대한 제품 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FTP-639MCL354 26 페이지.

2-6

The supply method of rolled paper

(1)

When printing in the paper supplied from rolled paper, printing disorder may

occur according to the inertia of rolled paper at the time of a printing start.

When you use the rolled paper exceeding φ80mm, please establish the

mechanism for a shock buffer between rolled paper and a printer.

2-7

(1)

If any trouble occur, it shall be solved by mutual discussion based on this specification.

Only the printer is subject to quality assurance.

(2)

Changes and additions that do not have compatibility of this specification shall be carries out

according to the mutual discussion. However, because this printer is the standard model,

changes can be carried out without notices within a range where compatibility exists.

(3)

This thermal printer comes with an 18-month warranty after the date of production (printer

serial No.). Any failure caused by the customer side in the warranty period and after expiry

of the warranty shall be serviced with charge. The maintenance service can be available in

five year after the date of discontinuation of producing this printer.

(4)

This printer does not provide the dust-tight and drip-proof structure. Take measures for the

dust-tightness and drip-proof from the main body casing side, as required.

(5)

Surfaces and edge surfaces of metallic parts may change colors; therefore, take measures for

discoloration as required, such as covering with a casing.

(6)

Smoke may be generated from parts of the printer; therefore, take measures for preventing

any foreign conductive materials from entering the inside as required, such as covering with

a casing.

Date

Design

Inspection

Rev.

Design

Changes made

Inspect.

FTP-639MCL354 SPECIFICATION

A1NA02273-0354

FUJITSU COMPONENT LIMITED

Approv.

Submit to