Brother MFC490CW - Color Inkjet - All-in-One 빠른 설정 매뉴얼 - 페이지 28
{카테고리_이름} Brother MFC490CW - Color Inkjet - All-in-One에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC490CW - Color Inkjet - All-in-One 47 페이지. Mac network connection
Brother MFC490CW - Color Inkjet - All-in-One에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (48 페이지), 설정 및 설치 (5 페이지), 연결 매뉴얼 (6 페이지), 수리 지침 (2 페이지)
페이지 인쇄
For Wireless Network Users
For Wireless Network Interface Users
13
Before you begin
First you must configure the wireless network settings of your machine to communicate with your network access
point (router). After the machine is configured to communicate with your access point (router) computers on your
network will have access to the machine. To use the machine from these computers, you will need to install the
drivers and software. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal everyday document printing, place the Brother machine as close to the
network access point (router) as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
Although the Brother MFC-490CW can be used in a both wired and wireless network, only one of the connection
methods can be used at a time.
Important
If you have previously configured the wireless settings of the machine you must reset the network
(LAN) settings before you can configure the wireless settings again.
On your machine, press Menu. Press a or b to choose Network and press OK.
Press a or b to choose Factory Reset, and then press OK.
Press 1 twice for Yes to accept the change.
Note
The following instructions are for infrastructure mode.
To set up your machine in any other wireless environment you can find instructions in the Network User's
Guide on the CD-ROM.
You can view the Network User's Guide by following the instructions below.
1 Turn on your computer/Macintosh
®
For Windows
:
2 Choose your model and the language. The CD-ROM main menu will appear.
3 Click Documentation, and then click HTML documents.
®
For Macintosh
:
2 Double-click Documentation, and then double-click your language folder.
3 Double-click top.html.
Infrastructure Mode
Access Point (router)
a
Wireless Network machine (your machine)
b
Wireless capable computer connected to the access point
c
Wired computer connected to the access point
d
28
®
. Insert the Brother CD-ROM into your CD-ROM drive.
4
3
1
2