Brother P-touch PRO DX PT-9200DX 빠른 참조 - 페이지 28

{카테고리_이름} Brother P-touch PRO DX PT-9200DX에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch PRO DX PT-9200DX 40 페이지. Brother label printer quick reference guide
Brother P-touch PRO DX PT-9200DX에 대해서도 마찬가지입니다: 부품 참조 목록 (16 페이지)

페이지 인쇄

5 After the on/off button lights up in green, press the feed/cut button

once to remove any slack in the tape and cut off the excess.

Printing a label

1 Turn on the PT-9200DX and start up the computer.

2 Start up P-touch Editor and make sure that "PT-9200DX " is selected as the printer in the Print Setup dialog box ([Print

Setup] command in the [File] menu of the PC software) or in the Chooser (when using the Mac software).

3 In the Size setting of the Page Properties, select the desired label size,

and then design your label layout.

4 Click the [Print] command in the [File] menu, select the desired settings in the Print dialog box, and then click the OK

button. The on/off button on the PT-9200DX flashes in green while it is receiving the data. After the label is printed, it

is fed from the tape exit slot and automatically cut off if the "Auto Cut" option was selected.

If the " Half Cut " option was selected, press the feed/cut button

once to cut off the label.

While printing multiple copies of labels, the printing speed may be

decreased so that a high resolution can be maintained.