Brother P-touch PRO DX PT-9200DX 빠른 참조 - 페이지 6

{카테고리_이름} Brother P-touch PRO DX PT-9200DX에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-touch PRO DX PT-9200DX 40 페이지. Brother label printer quick reference guide
Brother P-touch PRO DX PT-9200DX에 대해서도 마찬가지입니다: 부품 참조 목록 (16 페이지)

페이지 인쇄

Connecting the interface and power supply cables

Connect the PT-9200DX to the computer according to the instructions below.

When connecting to the serial port:

1 Make sure that both the PT-9200DX and the computer are turned off.

2 Connect one end of the enclosed serial interface cable to the serial connector (IOIOI) of the PT-9200DX and the

other end of the cable to the serial port of the computer. For a Macintosh connection, connect the PT-9200DX to

either the modem or the printer port (preferably the modem port).

The serial (RS-232C) ports of some computers are shaped so that the serial interface cable cannot be con-

nected. If this is the case, use a commercially available adapter.

3 Insert the plug on one end of the power supply cord into the power supply jack on the PT-9200DX.

4 Insert the plug on the other end of the power supply cord into an AC outlet equipped with a grounding terminal.

Some locations may require the use of an adapter provided with a grounding wire. Connect this wire to the ground

terminal.

5 Turn on the PT-9200DX, and then turn on the computer.

Serial