Fujitsu N7100 소모품 교체 및 청소 지침 - 페이지 13

{카테고리_이름} Fujitsu N7100에 대한 소모품 교체 및 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu N7100 20 페이지.
Fujitsu N7100에 대해서도 마찬가지입니다: 시작하기 (24 페이지)

Cleaning Inside the Scanner

Clean the interior of the scanner with a cloth slightly moistened with

Cleaner F1 or the Cleaning Wipe.

Scanning repeatedly may cause dust and paper dust to accumulate

inside the scanner resulting in a scanning error.

As a guideline, the inside of the scanner should be cleaned every 1,000

sheets scanned.

However, this criteria varies according to the type of documents

scanned. For example, it may be necessary to clean the scanner more

frequently when documents with insufficiently fused toner are scanned.

The glass scanner windows inside the ADF can become hot

when the scanner is used.

Turn off the scanner, unplug the power cable, and wait for at least 15 minutes

before cleaning.

ATTENTION

Do not use water or mild detergent to clean the inside of the scanner.

When a large amount of the cleaner is used, it may take some time until it is

dry.

Use a small amount to moisten the cloths. Also, wipe off Cleaner F1 well from

the part with a dry cloth.

N7100 C

ONSUMABLE

EPLACEMENT AND

LEANING

NSTRUCTIONS