Fujitsu S510M - ScanSnap - Document Scanner 시작하기 매뉴얼 - 페이지 21

{카테고리_이름} Fujitsu S510M - ScanSnap - Document Scanner에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu S510M - ScanSnap - Document Scanner 35 페이지. Color image scanner
Fujitsu S510M - ScanSnap - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 빠른 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (24 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)

페이지 인쇄

Fujitsu S510M - ScanSnap - Document Scanner 시작하기 매뉴얼

2. Change the scanning settings on the

"ScanSnap Manager - Scan and

Save Settings" window.

You can update your last-saved settings

for scanning when [Settings] is selected.

There are six tabs used to configure the

scan options at maximum (The number

of tabs displayed and items that can be

configured vary depending on the

operation mode.)

3. Click the [Apply] button to finish the

configuration.

The new settings are enabled.

⇒

3.2 Scanning Documents

This section describes how to scan the documents generally used in most offices. The ScanSnap can scan

the documents in various sizes.

For details of how to scan documents, refer to "Chapter 3 Using the ScanSnap" of

"ScanSnap S510M Operator's Guide."

1. Load the documents onto the paper chute.

Load the document so that the front side of the two-sided document (the first page when the

document contains more than one sheet) faces the paper chute.

Do not load the document beyond the reference marks on the side guide.

Reference

mark

Paper chute

Side guide

ScanSnap S510M Getting Started