Fujitsu S510M - ScanSnap - Document Scanner 시작하기 매뉴얼 - 페이지 29
{카테고리_이름} Fujitsu S510M - ScanSnap - Document Scanner에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu S510M - ScanSnap - Document Scanner 35 페이지. Color image scanner
Fujitsu S510M - ScanSnap - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 (3 페이지), 사양 (2 페이지), 빠른 설치 매뉴얼 (2 페이지), 시작하기 매뉴얼 (24 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)
페이지 인쇄
Chapter 4 Troubleshooting
This chapter describes common problems during the usage of the ScanSnap and how to remedy them.
4.1 Clearing Paper Jams
1. Remove the document on the paper chute.
2. Open the ADF while pulling the cover open lever.
3. Remove the jammed document.
4. Close the ADF.
You should hear the ADF click when it returns to its original position.
⇒
4.2 Troubleshooting Checklist
Before you ask for repair service, please check the following items.
If you cannot solve the problem even after checking the following items, contact the store where you
purchased the ScanSnap, or contact an authorized FUJITSU scanner service provider.
For troubleshooting errors caused during operation, refer to "7.2 Troubleshooting Checklist" of
"ScanSnap S510M Operator's Guide."
* Visit our Web site for your reference. Other useful information will be posted on the FAQ
corner at the following Web site:
http://scansnap.fujitsu.com/
Symptom
The ScanSnap
cannot be turned
on.
Check This Item
Is the power/USB cable connected
correctly?
Is the paper chute closed?
(The ScanSnap is automatically
powered on/off when the paper
chute is opened/closed.)
Is the Mac OS X started
completely? (The ScanSnap is
powered on/off in conjunction with
the computer.)
Remedy
Correctly connect the power/USB cable.
Disconnect and then re-connect the power
cable.
(Note: Wait at least five seconds before
reconnecting the power cable.)
Open the paper chute.
Wait until Mac OS X is started up completely.
The
LED stays out while Mac OS X is
starting up or in the sleep mode.
ScanSnap S510M Getting Started
Click!
28