Brother Quattro 2 6700D 운영 매뉴얼 - 페이지 25

{카테고리_이름} Brother Quattro 2 6700D에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Quattro 2 6700D 50 페이지. Kit para crear efectos decorativos con bobinas
Brother Quattro 2 6700D에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지), 사용 설명서 (40 페이지), (영어) 사용 설명서 (16 페이지)

페이지 인쇄
Brother Quattro 2 6700D 운영 매뉴얼
Precautions on Drawing
•
Do not try to fill an area with lines, otherwise the drawing cannot be converted to embroidery data.
•
Color can only fill an outlined area. Be sure to design the area that you wish to fill with color so that it
is outlined. In addition, a very small area (thin area) cannot be filled.
•
After selecting the color of an area, lines of the drawing other than those drawn freehand cannot be
edited or added. To change a line other than one drawn freehand, press
to the point before the first color of an area was selected. Before adding color to the drawing, be sure
that the shape of the lines is as desired.
•
The number of drawing operations are limited. Once this limit is reached,
the error message shown at the right appears and no operation other
than pressing
Once the drawing is finished, add colors as desired.
*
If no colors are to be added, continue with the procedure described in "3 Specifying Stitching Settings" on
page 31. If a stitching method is not to be specified, continue with the procedure described in "4 Converting
to Embroidery Data" on page 35.
*
To clear the entire area and start a new drawing, press
erased, and the screen appears as it did when My Custom Design was started up (see page 45).
*
To close the application and use the sewing machine, press
is erased (see page 46).
*
To save created data, continue with the procedure described in "Saving Image Data" on page 42.
can be performed.
to return the drawing
. All data that had been drawn is
. All data that had been drawn
25