Brother Quattro 2 6700D 사용 설명서 - 페이지 8
{카테고리_이름} Brother Quattro 2 6700D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Quattro 2 6700D 40 페이지. Kit para crear efectos decorativos con bobinas
Brother Quattro 2 6700D에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (50 페이지), (영어) 사용 설명서 (16 페이지)
페이지 인쇄
a
Loosen the screw on the guide plate sliding
the plate to fit the width of the braid.
a
Plate
b
Insert the braid through the guide before
attaching the foot onto the machine.
c
Tighten the screw and pull the braid to the
back of the braiding foot.
d
Attach the foot onto the machine.
e
Select the desired stitch and sew in a circular
manner gently guiding the braid.
6
■ CORDING FOOT
You can embellish using 1 to 3 cords of decorative
threads or yarn.
a
Slip a cord from the right of the presser foot,
into each guide (to use single cord, use the
center guide).
b
Place the cords under and to the back of the
cording foot.
c
Select a zigzag or decorative stitch and sew in
a circular manner gently guiding the cords.
Note
• When sewing with zigzag or decorative stitches,
adjust the stitch width, so that it is slightly wider than
the width of the braid or cording.