Brother Quattro 6000D 운영 매뉴얼 - 페이지 42

{카테고리_이름} Brother Quattro 6000D에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Quattro 6000D 50 페이지. Kit de actualización iii
Brother Quattro 6000D에 대해서도 마찬가지입니다: 매뉴얼 (42 페이지), 운영 매뉴얼 (6 페이지), 사용자 설명서 (48 페이지), 운영 매뉴얼 (29 페이지), 운영 매뉴얼 (21 페이지), (영어) 사용 설명서 (49 페이지), (영어) 사용 설명서 (21 페이지), (영어) 사용 설명서 (48 페이지)

페이지 인쇄
Brother Quattro 6000D 운영 매뉴얼

Saving Image Data

Saved data that has been converted to embroidery data cannot be recalled with My Custom
Design. To recall data and edit it with My Custom Design, save the image data on USB media
before converting it to embroidery data or press
pattern drawing screen, and then save the data.
42
after the conversion to return to the
1
Insert USB media into the USB port located on the
right side of the machine.
Caution
•
Do not insert anything other than USB media into the
USB media port. Otherwise, the USB media drive may
be damaged.
•
Do not insert USB media containing pattern data other
than those saved using this application. (Only .pm7 and
.phc data can be used.)
2
Press
.
*
If the pattern is displayed in the enlarged area, the enlarged
display will be canceled, then the pattern is saved.
*
If the
key or the
be selected instead, then the pattern is saved.
3
The screen shown at the left appears. If the image
data was saved successfully, the previous screen
automatically appears.
*
Saving image data takes approximately 3 seconds.
Caution
Do not turn off the machine while the [Saving] message is
displayed, otherwise saved data may be lost. In addition,
do not try to remove the USB media, otherwise the USB
media may be damaged.
key is selected, the
key will